Filter
Top Products
IV - 32
Section 4 - Chapter 4 - OkiNet for TCP/IP
OKI OkiLAN 6020e User’s Guide
Enabling/Disabling Protocols
To enable or disable protocols on the OkiLAN 6020e,
select the Protocols tab. Select each protocol you wish
to enable. If you disable a protocol, the OkiLAN 6020e
will no longer communicate using that protocol.
SNMP Trap Configuration
The SNMP Trap option allows configuration of traps.
Traps are unsolicited information concerning the
OkiLAN 6020e. Traps can be sent to an SNMP
manager or be broadcast to all hosts on the local
segment.
To configure SNMP traps, select the SNMP Traps tab.
Note: SNMP options need to be configured only if
you are managing an OkiLAN 6020e or getting
system information using SNMP.
Protocol
Select the protocol for which you wish to configure
trap information.