Filter
Top Products
VI - 6
Section 6 - Chapter 2 - The OkiLAN 6020e Utility
OKI OkiLAN 6020e User’s Guide
Print Configuration
The Print Configuration option is accessed by selecting
Print Config from the File pull-down menu. Choose
this option to print an OkiLAN 6020e configuration
sheet. A configuration sheet will print to all output
ports.
Status
The Status option is accessed by selecting Status from
the File pull-down menu. This option displays the
status and EtherTalk configuration of the selected
OkiLAN 6020e printer.
Advanced Configuration Options
The following configuration options are advanced
features of the OkiLAN 6020e utility. Most users will
not need to access these features. Read the folloiwng
descriptions carefully before utilizing these options.
Set Type
The Set Type option is accessed by selecting Type from
the Configure pull-down menu. This option allows you
to configure the AppleTalk Type. For some print
spoolers to work properly, the AppleTalk Type must be
changed. Refer to Appendix C of this section for more
information.
The default AppleTalk Type is LaserWriter. For most
printer drivers, this setting should not be changed. This
includes the LaserWriter Drivers, HP LaserJet Drivers
and other drivers.
Each EtherTalk printer port supports two AppleTalk
Types:
• Type1 (mandatory) - The Type 1 default is
LaserWriter. This option should not be changed
unless the user wishes to use a print spooler without
bypass or the user does not want the printer to
respond to any of the LaserWriter drivers.
• Type 2 (optional) - Select this option when
configuring for a spooler.