Filter
Top Products
|
User’s Guide: English 19
SNMP Settings
MIB-II Category
Authentic Community–Sets the authentic community name.
Maximum length: 15 characters.
Trap Community–Enter the trap community name.
Maximum length: 15 characters.
Trap IP Address–Enter the trap notice address. If the IP
address is 0.0.0.0, traps will not be issued.
SysContact–Sets MIB-II SysContact (the administrator
name). Maximum length: 79 characters.
SysName–Sets MIB-II SysName (the product name).
Maximum length: 79 characters.
SysLocation–Sets MIB-II SysLocation (the system location).
Maximum length: 79 characters.
Default TTL–Sets the IP packet survival time (TTL value).
The value should be between 0 - 255 seconds.
Enable Authen Trap–Enter whether AuthenTrap is permitted
or not. Select “1” for yes, “2” for no.
Printer Trap Category Trap–Sets PrinterTrap to ENABLE
or DISABLE.
Trap Type–Select the trap type from LOCAL, UDP and IPX.
UDP Trap Address, IPX Trap Address–Enter each trap
notice address. If the value is “0.0.0.0” or
“00000000:000000000000”, traps will not be issued.
Printer Menu
!
These settings cannot be changed using the Web page.
Make changes from the printerís front panel.
Paper and trays–Select the paper size, paper thickness, etc.,
for each tray. Machine cannot be configured from this
menu.
Timers and alarms–Set the auto page eject time (timeout),
power save time, etc. Not functional with fax machines.
Emulations–Set the printer emulation. Not functional with
fax machines.
Connecting Using TCP/IP
In order to use TCP/IP, first configure an IP address on the
network print server. You can configure its IP address:
· Via the printer’s front panel (if no DHCP server is
available)
· Using TELNET
· Through the network print server Web Page using a Web
browser.
!
Please consult your network administrator concerning
the right IP address to use.