Filter
Top Products
Troubleshooting 104
Print Server mode
Check the File Server name set in the NIC and on the File Server are the
same.
Check the Printer name set in the File Server and the NetWare Port
name set in the NIC are the same. If there are multiple NICs, configure
the NetWare Port names to be different.
Check the NetWare login password is correct.
Check the Machine name is the same as the Print Server name set in
the File Server.
Printer does not print.
Check the network cable is correctly connected.
Change the cable and try again.
Turn the printer off and on again.
Check the NIC is connected to the File Server.
Check the printer driver has been mapped to the correct netware
queue.
PostScript error occurs if a Banner Page is printed.
A PostScript Banner page cannot be printed in NetWare 3.12 Remote
Printer mode. If a PostScript printer is used and a Banner Page is
printed, PostScript error is displayed. Turn the banner output Off in
the client’s printer settings.
EtherTalk
Not identified by the Chooser and the Setup Utility.
Turn the printer off and on again.
Check the network cable is correctly connected.
Change the cable and try again.