Filter
Top Products
OkiLAN 8100e Configuration 31
Help Menu
In the [Help] menu, [About] is available as well as revision information
for AdminManager.
Using a Web browser
If the OkiLAN 8100e is connected to the network using TCP/IP, its
settings and the printer menu settings can be configured using a Web
browser, such as Microsoft Internet Explorer Version 3.0 and higher,
or Netscape Navigator version 3.0 and higher. No guarantees are
offered for other browsers. Refer to the relevant manuals for details of
how to launch and use the browser.
The network addresses used in this manual are shown as examples
only. Network addresses used in your installation must be generated
from your own network. To apply configuration changes using a Web
browser, you will be prompted for a username and password.The
username is [root] and the default password is the last six characters
of the Ethernet address.
The following explanation uses Windows 95 and Microsoft Internet
Explorer version 4.0 with the C5300 as an example.
1. Configure the IP Address, Subnet Mask and Gateway for the
network card. Launch the Web browser, enter the IP Address of
the network interface card in [Address (Location/Position)] and
press the [Enter] key. The Printer Status screen is displayed.
2. Select a tab and items to be changed in the left frame. You need
to log in as “root” to be able to configure all items. Non-root
users cannot configure all items.
3. To ensure correct operation, follow the procedure below for the
appropriate network browser.