Filter
Top Products
Menu functions> 118
USB
MENU
This menu controls the operation of the printer’s USB data
interface.
N
ETWORK
MENU
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
ITEM SETTINGS EXPLANATION
SOFT RESET ENABLE /
DISABLE
Enables or disables the SOFT RESET
command.
SERIAL NUMBER ENABLE /
DISABLE
OFFLINE
RECEIVE
ENABLE /
DISABLE
SPEED 12 / 480 Mps Selects the interface speed
ITEM SETTINGS EXPLANATION
TCP/IP ENABLE /
DISABLE
Enables or disables this network
protocol.
IP VERSION IP V4 / IPV 4 &
V6
NETBEUI ENABLE /
DISABLE
Enables or disables this network
protocol.
NETWARE ENABLE /
DISABLE
Enables or disables this network
protocol.
ETHERTALK ENABLE /
DISABLE
Enables or disables this network
protocol.
FRAME TYPE AUTO / 802.2 /
802.3 /
ETHERNET II /
SNAP
Selects the Ethernet MAC layer
frame type.
IP ADDRESS
SET
AUTO / MANUAL Specifies whether IP address
allocation is automatic (DHCP) or
manually assigned.
IP ADDRESS xxx.xxx.xxx.xxx Current assigned IP address. To
change, press ENTER and use
+/–
keys to increment 1st octet, then
press ENTER again to move on to
next octet. When 4th octet has been
set, press ENTER again to register
new address.