Filter
Top Products
OMB-DaqBook User’s Manual
01-23-02 DaqBook Hardware 3-13
The rear panel is made of three termination panels with connectors for the various sensors.
Hardware Setup
WARNING
Electrical Shock Hazard! To avoid injury or equipment damage, turn off power to all connected
equipment during setup.
CAUTION
Use ESD tools, containers, and procedures during setup of DBK cards. Electrostatic discharge can
damage some of the components.
To prevent pin damage, align DBK cards with the backplane DB37 connectors before gently
pressing them together.
1 – Turn off system power and disconnect DaqBook/260
If the DaqBook/260 is presently connected in a system, turn off all system devices and disconnect it.
2 – Remove top cover
Remove the two top cover screws and slide off the top cover.
3 – Remove card drawer
A. Remove the two screws holding the card drawer to the chassis.
B. Loosen the three captive thumbscrews holding the termination panels to the chassis.
C. Using the handle, carefully slide out the card drawer.
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
K
CHROM +
ALUMEL -
01
324
56
7
89
10 11 12
13
A
A
BB
C
C
12
12
ANA COM--
1
1 2
2
3
3
45
5
6
677
8
9
9
10
10 11
11
0
13
13 14
14
15
15
ANA COM--
10
+
+
+
+
+
+
+
-
-
-
-
-
-
-
-
+
2
4
5
67
ANA COM--
A
A
B
B
C
C
12
4
8
0