Filter
Top Products
Appendix A
38
Appendix A
39
CRB Files
The CRB le is a convenient method for creating and maintaining a set of commands that
can be easily sent to the reader. The CRB les are regular text les with the .crb extension.
These CRB les can be created in any text editor such as “Notepad” and saved with the le
extension of .crb.
The CRB le can be sent to the reader using any standard serial program. You can use
HyperTerminal Program to send the le. Please refer the topic in Chapter 1 - Quick Start-
Up Procedure to set up the HyperTerminal program. After setting the connection use the
Transfer pull-down menu, select “Send Text File...“ (gure) and then select the le you want
to send to the LH2.
The CRB le allows for combining multiple functions into a single le.
NOTE: You can comment your CRB le with a semicolon(;) as shown below.
The standard format of the CRB le is
;>PA7 ;enable programming mode
commands
commands
.
.
commands
~ ;save the settings
PA8 ;disable the programming mode