Filter
Top Products
Continuous Scan
84
Continuous Scan
85
Command Name:
Duplicate Scan Delay
Usage:
Sets the duplicate scan delay time in the continuous scan mode.
Description:
This command allows you to program the delay time between scans
while in continuous scan mode so that the imager will not read the
same bar code again.
Default:
Duplicate Scan Delay is set to 0 seconds
Programming Code: Serial Command:
3 Seconds P%d63<┘
Options:
Programming Code: Serial Command:
1 Second P%d61<┘
0 Second (Default) P%d60<┘