Filter
Top Products
Advance Settings
88
Advance Settings
89
Command Name:
Targeting Zone Tolerance
Usage:
Sets the Targeting Zone Tolerance of the imager.
Description:
This command allows you to program the decode accuracy of the
LH2. The 50 setting is the most accurate while the 1600 barcode is
the most tolerant. If you set the unit to a 50 setting, you have to aim
the targeting dot directly on the desired barcode for it to be read.
This setting is helpful when you are trying to read a single bar code
amongst a group of bar codes on a label.
Default:
Targeting Zone Tolerance is set to 1600.
Programming Code: Serial Command:
50 P%9d32<┘
Options:
Programming Code: Serial Command:
1600 (Default) P%9d640<┘
75 P%9d4b<┘