Filter
Top Products
2626262626
Packard Bell EasyNote ST Disassembly Manual
26
Button Board
To remove the button board, first remove the top cover (see Top Cover on page 11), and then
perform the following steps:
1. Remove the three screws securing the button board.
Fig. 42 Location of button board screws.
2. Remove the button board.
LCD Bezel
To remove the LCD bezel, first remove the LCD assembly (see LCD Assembly
on page 13), and
then perform the following steps:
1. Remove the eight screw covers on the LCD bezel (four at the top and four at the bottom).
2. Remove the screws that became accessible after removing the covers.
3. Carefully pry open the LCD bezel; it has been clicked into place.
Inverter Board
To remove the inverter board, first remove the LCD bezel (see LCD Bezel
on page 26), and then
do the following:
1. Disconnect the cable on both ends of the inverter board.
Fig. 43 Location of inverter board.
2. Remove the screw securing the inverter board (see Fig. 43
on page 26).
3. Extract the inverter board.