Filter
Top Products
2828282828
Packard Bell EasyNote ST Disassembly Manual
28
5. Disconnect the LCD cable.
Fig. 46 Location of LCD cable connector.
6. Remove the side brackets (four screws on each side).
Webcam/Microphone
To remove the webcam and microphone, first remove the LCD panel (see LCD Panel
on page 27),
and then do the following:
1. Disconnect the cable from the header on the module.
Fig. 47 Location of webcam connector.
2. Carefully remove any adhesive tape securing the module (see Fig. 47 on page 28).
3. Extract the webcam/microphone module.