Filter
Top Products
Adding Hardware Modifications
10-28 Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
Figure 10-30: Example of Adding Hardware (ATM Switch: Slave)
Figure 10-31: Example of Adding Hardware (When Looptime is
Specified)
Setting Configuration Data
To set the clock mode of the ATM Switch, refer to the
SET clock
command in
the Command Manual. To set the loop time, refer the
SET looptime
command
in the Command Manual.
For other hardware, refer to the appropriate manual(s) for the other hardware.
Centillion 1200N
Centillion 1200N
Centillion 1200N