Filter
Top Products
13
Getting StartedUseful InformationTroubleshootingAppendix
First-time Operation
Preparation
A Check and identify the supplied accessories.
If you do not find the described accessories, contact your technical support office.
B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging
(Î page 34).
Slide the battery pack in parallel with the arrow direction and attach it so that the
left and right dents (A) on the new battery pack match the projections (B) of the
computer.
In case that the dents does not match the projections of the computer, detach the
battery pack once, then slide it while pushing it lightly to avoid floating.
z To remove
Slide both the left and right latches to the
unlocked position, and push out the bat-
tery pack in parallel with the computer.
CAUTION
z Make sure the latches are securely locked. Otherwise the battery pack may fall
when you carry the computer.
z Do not touch the terminals of the battery pack and the computer. Doing so can
make the terminals dirty or damaged, and may cause malfunction of the battery
pack and the computer.
A Pull the carrying handle forward.
B Press and hold the latch (C) located at the front.
C Lift open the display.
Store the carrying handle, after you open the display.
CAUTION
z Do not open the display wider than necessary (140° or more), and do not apply
excessive pressure to the LCD. Do not open or close the computer holding the
edge of the LCD segment.
• AC Adaptor . . . . 1
Model No: CF-AA6503A
• AC Cord . . . . . . 1 • Battery Pack . . .1
Model No: CF-VZSU56U
• Modem Telephone
Cable . . . . . . . . . 1
• Operating Instructions (This book) . . . . . . . . . . . . . . . . . . . . . . . . .1
• Product Recovery DVD-ROM Windows Vista
®
Business SP 1 . .1
1 Insert the battery pack.
1
AA
B
Battery
Latches
2 Open the display.
2
3
1
2
C