Panasonic DX-2000 Fax Machine User Manual


 
146
Access Code
The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code is
registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to re-enter the access code in order to use the machine
again. Registering the Access Code does not affect the use of the machine in any other way.
Setting the Access Code
(see Note 1)
1
2
3
4
Enter a 4-digit Access Code.
Ex:
5
6
Select Restriction Level.
for All Operations.
or
for Setting and Printing the User Parameters and
Fax Parameters only.
Ex:
7
1. To erase the Access Code, enter the Access Code and press and follow the procedure above to step 3,
then press and .
FUNCTION
7
SET MODE (1-6)
ENTER NO. OR
4
SET
FAX PARAMETER(1-164)
NO.=
3 8
SET
38 ACCESS CODE
❚❚❚❚
1 2 3 4
38 ACCESS CODE
1234
SET
38 ACCESS CODE
1:ALL 1234
1
1
2
2
2
38 ACCESS CODE
2:PARAMETERS 1234
SET
STOP
SET
CLEAR
SET
STOP
Note: