Filter
Top Products
214
Print reduction modes
The methods used to determine how an incoming document will be
reduced to print onto the paper loaded in your machine.
Program keys
Keys that are defined for storing a sequence of stations to be dialed.
Protocol
A protocol is the special set of rules for communicating that the end points
in a telecommunication connection use when they send signals back and
forth. Both end points must recognize and observe the protocol.
PSTN
Public Switched Telephone Network. Network of interconnected switching
equipment and transmission facilities.
Relay address
A 2-digit code that identifies your machine is programmed in a relay
network.
Relay network
A group of facsimile machines that communicate via a relay station.
Relay station
A certain type of facsimile machine that can store and forward documents
to an end receiving station and/or a relay station in another relay network.
Your machine can not be used as a relay station.
Relayed Transmission
Sending a document to a relay station, which in turn, sends the document
to the end receiving station.
Relayed Transmission Report
A report that contains information regarding the last document
transmission to a relay station.
RESOLUTION
Relates to the number of dots scanned or printed per certain square. The
quality of the image increases as the number of dots per certain square
increases.
Router
A special purpose computer (or software package) that handles the
connection between 2 or more networks. Routers act like traffic cops, they
spend their time looking at the destination addresses of the packets
passing through them and deciding which route to send them on.
Sender Selection
The user can select one of 24 pre-programmed sender’s name and email
address/telephone number before each transmission.
Server
A computer, or a software package, that provides a specific kind of service
to client software running on other computers. A single server machine
could have several different server software packages running on it, thus
providing many different servers to clients on the network.
Selective reception
A function that can be set so that your unit will receive from only those
machines programmed into your dialer.
SMTP (Simple Mail Transfer
Protocol)
This is the main communication protocol used to send and receive email
on the Internet.
Station name
Alphanumeric ID which can be programmed for each One-Touch dialing
and Abbreviated dialing number.
Stored documents
Documents that have been scanned and now are stored in your machine’s
memory.
Sub-address
ITU-T recommendation for further routing, forwarding or relaying of
incoming faxes.
Sub-address Password
ITU-T recommendation for additional security that corresponds to the Sub-
address.
Subnet Mask
A mask bit used to manage sub-segments of the network which is defined
with network IDs.
Glossary