Panasonic DX-2000 Fax Machine User Manual


 
41
Setting the Internet Parameters
Setting the parameters for the LAN Interface
Depending on how the DX-2000 will be configured to communicate on the LAN, the appropriate parameters listed
in the table below must be stored first. (See pages 14 to 18)
Parameter Comments
1 DATE & TIME Current Date and Time. (See page 36)
2 LOGO Up to 25 characters & digits. (See page 38)
3 CHARACTER ID Up to 16 characters & digits. (See page 39)
4 ID NO. Your Fax Telephone Number. (Up to 20 digits, see page 40)
5 MAC ADDRESS Hardware Address hard-coded into the DX-2000. (If required, can be obtained
from the 2nd page of the Fax Parameter List printout, by pressing
[FUNCTION][6][4][SET])
6* IP ADDRESS IP Address assigned to your DX-2000.
7* SUBNET MASK Subnet Mask assigned by the Network Administrator.
8* SMTP SERVER NAME The name of the SMTP Mail Server. (Up to 60 characters)
8* SMTP SERVER IP ADDR IP Address of the SMTP Mail Server.
9* DEF. ROUTER IP ADDR IP Address of your Default Router.
10*
EMAIL ADDRESS
The Email Address assigned to your DX-2000 for sending and receiving. (Up
to 60 characters)
11* DNS SERVER IP ADDRESS IP Address of the DNS Server.
12*
POP SERVER NAME
Name of the POP Mail Server.
12* POP SERVER IP ADDR IP Address of the POP Mail Server.
13*
POP USER NAME
User Name assigned to your DX-2000. (Up to 40 characters)
14* POP PASSWORD Password assigned to your DX-2000. (Up to 10 characters)
15*
HOST NAME
The Host Name assigned to your DX-2000. (Up to 60 characters)
16 DEFAULT SUBJECT The default information to be added to the Subject Line for all outgoing email
(up to 40 characters). To manually input this information before transmission,
change the Fax Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
17 DEFAULT DOMAIN When the outgoing email address is incomplete by SMTP standards, the
Frequently Sent Domain specified here will be automatically added to the
email address. This feature is also useful as a shortcut when manually
entering email addresses to a frequently used Domain. (Up to 50 characters)
18 REMOTE PASSWORD This is a security password that allows Remote Programming of the Internet
Parameters and the Auto Dialer and the retrieval of the Journal via an Email.
(Up to 10 characters)
19 RELAY XMT PASSWORD A password that provides Network security for your Relay Station (used
exclusively for G3 relay purposes). (Up to 10 characters)
20 MANAGER’S EMAIL ADDR Department Manager’s Email Address for notification of all Internet relayed
transmissions for supervision and cost control purposes. (Up to 60 characters)
21 DOMAIN NAME (01) Enter the Domain Name(s) that have been authorized to access your Internet
Fax for Relayed XMT Request. (Up to 30 characters)
22 DOMAIN NAME (02)
23 DOMAIN NAME (03)
24 DOMAIN NAME (04)
25 DOMAIN NAME (05)
26 DOMAIN NAME (06)
27 DOMAIN NAME (07)
28 DOMAIN NAME (08)
29 DOMAIN NAME (09)
30 DOMAIN NAME (10)
2