Filter
Top Products
163
Sending Documents via Internet Relay
Once you have recorded all the necessary parameters in your machine, you can send a document to one or
multiple G3 fax machines automatically through the Internet Relay Station by using the procedure described
below. The Internet Relay Station must have all the necessary parameters setup.
To a Location That Has a Pre-programmed Relay Station
(see Note 1)
1
Set document(s) face down.
2
Enter only the telephone number(s) of the End Receiving
Station(s) using any combination of the following methods:
• One-Touch Dialing
• Abbreviated Dialing
• Manual Number Dialing (up to 70 stations), press
after each station is entered. (see Note)
• Directory Search Dialing, press after each
station is entered (For details, see page 93 to 96.)
Ex:
3
The document(s) is stored into memory and your machine
starts sending the document(s) to the Relay email
address of the Relay Station with the telephone number
for the End Receiving Station.
Ex: End Receiving Station : 4681111234
(Telephone number)
[see Note 1]
Relay Station : uk-rly@london.panasonic.co.uk
After the Relay Station completes its transmission to the
End Receiving Station(s), your machine receives a
COMM. Journal from the Relay Station. This Journal
confirms whether the Internet Relayed Transmission was
successful.
1. If the Relay Station requires a special access number to get an outside line, enter that access number first then press
to enter a pause (represented by a "-") before entering the full number.
ENTER STATION(S)
THEN PRESS START 00%
SET
SET
02
<02> STOCKHOLM
4681111234
START
* STORE * NO.002
PAGES=001 05%
* STORE * COMPLETED
TOTAL PAGES=005 25%
ON LINE *MEM.XMT*
ID:ur-rly#4681111234
PAUSE
Relayed Transmission
Note:
6