80
Halftone (see Note 1)
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is preset
to HALFTONE = Off. You can select either Fast or Quality mode.
Press to:
Verification Stamp (see Note 2) (see Note 3)
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small mark.
Press to switch it ON or OFF. Press to return to standby.
1. When you select HALFTONE, FAST or QUALITY, your machine will automatically select Fine Resolution.
2. When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored
in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted.
If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax
Parameter No. 028, see page 73.
3. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 004, see page 72.
HALFTONE
HALFTONE
QUALITY
FAST
HALFTONE
QUALITY
FAST
HALFTONE
QUALITY
FAST
HALFTONE = Off HALFTONE = Quality HALFTONE = Fast
STAMP
SET
STAMP = On
STAMP
STAMP = Off
STAMP
STAMP=ON STAMP=OFF
Basic Transmission Settings
Note: