Filter
Top Products
187
540/541
542
543/544
Communication error occurred while transmitting. 1. Reload the document and send again.
2. Check with the other party.
--
550 Telephone line disconnected. Check with the other party. --
552/553
554/555
Communication error occurred while receiving. Check with the other party. --
580 Sub-address transmission to a unit that has no Sub-
address function.
Check the remote station. 135
581 Sub-address Password transmission to a unit that has
no Password Sub-address function.
Check the remote station. 135
601 ADF Door was opened during ADF transmission. Close the ADF Door and send again. 191
623 No document loaded on the ADF. Reload the document and send again. --
630 Redial was not successful due to a busy line. Reload the document and send again. --
631 During dialing,
STOP
was pressed. Reload the document and send again. --
634 Redial was not successful due to no response from the
called station or wrong number dialed.
Note:
If busy tone was not detected, the machine will
only redial once.
Check the telephone number and send again. --
638 Power failure occurred during the communication. Check the power cord and plug. 32
712 Incorrect email address. Check the registered email address. Check the
IP Address of the SMTP Server with the
Network Administrator.
--
713 Memory overflow in the LAN Interface. The document data exceeded 1.6 MB/page
and cannot be sent.
--
714 Cannot logon to the LAN. Check the 10Base-T cable connection. An
unexpected LAN problem occurred. Contact
the Network Administrator.
--
715 TCP/IP connection timed out. Check the Internet Fax parameter settings.
Verify the IP Address, Default Router IP
Address, SMTP Server IP Address.
--
716 Cannot logon to the designated SMTP Server. Check the SMTP Server IP Address setting.
Contact the Network Administrator.
--
717 Incomplete SMTP Protocol transmission. SMTP
Server’s hard disk may be full.
SMTP Server is defective. Contact the Network
Administrator.
--
Continued on the next page...
Info.
Code
Meaning Action Page
Troubleshooting
8