Filter
Top Products
FP2−CCU
Specifications
6 − 6
6.3 Table of MEWTOCOL−COM Error Code
27 Frame Over Error:
• Situation
The command and response exceed 118 bytes.
• Example of error
This occurs when a WD command is sent, if the data being sent at one
time exceeds 118 bytes.
• ERR LED on the FP2 Computer Communication Unit
Lights
40 BCC Error:
• Situation
Transmission error occurred in command data.
• Example of error
This occurs if the calculation value of the BCC added to the command
being sent is erroneous.
• ERR LED on the FP2 Computer Communication Unit
Lights
41 Format Error:
• Situation
Command message that does not match the transmission format was
sent.
• Example of error
This occurs if the “#” and transmission destination are missing from the
command being sent.
• ERR LED on the FP2 Computer Communication Unit
Lights
42 Not Support Error:
• Situation
An unsupported command was sent.
A command was sent to an unsupported destination.
• Example of error
This occurs if the command name is erroneous by the command which
has been incorrectly notated .
• ERR LED on the FP2 Computer Communication Unit
Off