Filter
Top Products
3. Preparation
21
3 PreparationConnections and Setup
3.1 Connections
Important:
L The unit will not function when there is a
power failure. To make calls in emergency
situations, you should connect a
telephone that can function during a
power failure to the telephone line.
Caution:
L After connection, you must charge the
batteries to make or answer calls with the
handset (page 22).
L When you operate this product, the power
outlet should be near the product and
easily accessible.
L Be sure to use the telephone line cord
included in this unit.
L Do not extend the telephone line cord.
L This unit is not designed to be used with
rotary (pulse dialling) services.
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
L If you use the unit with a computer and your
internet provider instructs you to install a
filter, please connect the telephone line cord
as follows (page 91, 92).
1 Power cord
L Connect to the power outlet (220 V – 240
V, 50/60 Hz).
2 Telephone line cord
L Connect to a single telephone line jack.
2
1
(For Australian
users)
(For New
Zealand users)
Telephone
line cord
Noise filter
(For ADSL users)
FC235AL-PFQX2248ZA_en.book Page 21 Monday, June 20, 2005 2:19 PM