Filter
Top Products
5. SMS (KX-FC235AL only)
44
5.5.1 Displaying a received
message
1 Press {j/OK}.
2 Select “SMS”, then press {>}.
3 To access the public mailbox
Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then
enter its password.
L If a mailbox contains new (unread) SMS
messages, “@” is displayed next to the
total number of messages for that
mailbox.
4 Select “Receive List”, then press {>}.
5 Press {e} or {v} repeatedly to select a
message.
L Messages which have already been read
are indicated by a Q, even if they were
read using another handset.
6 Press {j/OK} to read the message content.
Note:
L To call the message sender, press {C} or
{s}.
L If “SMS Full” is displayed, new SMS
messages cannot be received. Erase
unnecessary messages (page 43, 44).
L If you receive a message from a party saved
in the handset phonebook, the stored name
is displayed.
L Some SMS service providers attach a 1-digit
number to the message sender’s telephone
number. As a result, sender names stored in
the handset phonebook may not be
displayed.
5.5.2 Replying to a message
1 While reading a received message, press
{j/OK}.
2 Select “Reply”, then press {>}.
3 Enter a message (page 46), then press
{j/OK}.
4 Edit the destination telephone number
and/or press {j/OK}.
5 Continue from step 9, “5.4.1 Writing and
sending a new message”, page 42.
Editing/forwarding a message
1. While reading a received message, press
{j/OK}.
2. Select “Edit Message”, then press {>}.
3. Continue from step 5, “5.4.1 Writing and
sending a new message”, page 42.
5.5.3 Erasing received messages
1 While reading a received message, press
{j/OK}.
2 Select “Erase”, then press {>}.
L To erase all messages in the selected
mailbox, select “Erase All”, then press
{>}.
3 Select “Yes”, then press {>}.
4 Press {ih}.
5.5.4 Storing the sender’s
number in the handset
phonebook
1 While reading a received message, press
{j/OK}.
2 Select “Add Phonebook”, then press {>}.
3 Continue from step 3, “4.3.1 Storing
phonebook items”, page 31.
5.5.5 Editing the sender’s
number before calling back
1 While reading a received message, press
{j/OK}.
2 Select “Edit and Call”, then press {>}.
3 Edit the number, then press {C} or {s}.
FC235AL-PFQX2248ZA_en.book Page 44 Monday, June 20, 2005 2:19 PM