Panasonic KX-FC235AL Fax Machine User Manual


 
3. Preparation
25
Initial Programming
3.7 Date and time
You must set the date and time for both the
handset and the base unit.
Times are set independently and may not
necessarily be identical.
L The other partys fax machine will print the
date and time on each page you send
according to your base units date and time
setting.
L The accuracy of the clock is approximately
±60 seconds a month.
3.7.1 With the handset
Important:
L Confirm that the power cord of the base
unit is connected.
L Ensure that w is not flashing.
L If a power failure occurs, set the date and
time for the handset again.
1 Press {j/OK}.
2 Select Handset Setup, then press {>}.
3 Select Time Settings, then press {>}.
4 Select Set Date & Time, then press
{>}.
L The cursor (|) will appear on the display.
5 Enter the current date/month/year by
selecting 2 digits for each.
Example: 10 August, 2005
Press {1}{0} {0}{8} {0}{5}.
6 Enter the current hour/minute by selecting 2
digits for each. Press {*} repeatedly to
select AM, PM, or 24-hour time entry.
Example: 3:15 PM (12-hour time entry)
1. Press {0}{3} {1}{5}.
2. Press {*} repeatedly to display PM.
7 Press {j/OK}.
8 Press {ih}.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
Note:
L The date and time on the handset will be lost
after a power failure and must be reset, but
the base unit has backup to keep the time.
{ih}
{j/OK}
{<}{>}
@
@
@
FC235AL-PFQX2248ZA_en.book Page 25 Monday, June 20, 2005 2:19 PM