Filter
Top Products
10. Programmable Features
80
10.5.10 Other options
Changing the base unit PIN (personal
identification number)
For security, the base unit PIN must be entered
when changing certain settings. The default PIN
is “0000”.
Important:
L If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, consult
your nearest Panasonic service centre.
1. Press {j/OK}.
2. Select “Base Unit Setup”, then press
{>}.
3. Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it.
4. Select “Other Options”, then press {>}.
5. Select “Base Unit PIN”, then press {>}.
6. Enter the new 4-digit base unit PIN, then
press {j/OK}.
7. Press {ih}.
Resetting handset programming that uses
the base unit PIN
Handset programming that uses the base unit
PIN will be reset (page 73).
1. Press {j/OK}.
2. Select “Base Unit Setup”, then press
{>}.
3. Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “Other Options”, then press {>}.
5. Select “Reset Base”, then press {>}.
6. Select “Yes”, then press {>}.
7. Press {ih}.
Note:
L The following items will also be deleted or
reset to their default settings:
– All SMS-related settings and messages
(KX-FC235AL only, page 41)
– Caller ID list for the handset (page 37)
L The repeater mode will be retained (page
82).
FC235AL-PFQX2248ZA_en.book Page 80 Monday, June 20, 2005 2:19 PM