Filter
Top Products
10. Programmable Features
78
6. Select “Yes”, then press {>}.
7. Press {ih}.
Note:
L The following items will be deleted or reset to
their default settings:
– Settings listed on page 73 (not including
items using the base unit PIN)
– Redial list
– Voice enhancer
– Category names
– Category ring tones
L The following items will be retained:
– Handset phonebook items (category
names and ring tones will be reset to their
default settings.)
– Date and time
10.5.8 Programmable functions
using the base unit PIN
Helpful hints:
L To exit programming, press {ih} at any
time.
10.5.9 Call Options
Changing the recall time
Change the recall time of the handset, if
necessary, depending on the requirements of
your service provider or PBX.
1. Press {j/OK}.
2. Select “Base Unit Setup”, then press
{>}.
3. Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “Call Options”, then press {>}.
5. Select “Recall”, then press {>}.
6. Select the desired setting, then press {>}.
7. Press {ih}.
Setting pause length
Change the pause length of the handset, if
necessary, depending on the requirements of
your service provider or PBX.
1. Press {j/OK}.
2. Select “Base Unit Setup”, then press
{>}.
3. Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “Call Options”, then press {>}.
5. Select “Pause Length”, then press {>}.
6. Select the desired setting, then press {>}.
7. Press {ih}.
{ih}
{j/OK}
{>}
{C/T}
FC235AL-PFQX2248ZA_en.book Page 78 Monday, June 20, 2005 2:19 PM