Filter
Top Products
18
Quick Start
For Assistance, Call 1-800-435-7329
Basic operations
Document
feeder tray
(RESOLUTION)
Transmitting documents
1
Open the document feeder tray.
2
Insert the document FACE DOWN (up to
15 sheets) until a beep tone is heard.
3
Adjust the document guides to the width of the
document.
4
Press (RESOLUTION) repeatedly to the desired
setting, if needed (see page 17).
5
Press (SP-PHONE) or lift the handset.
6
Dial the phone number.
¡If you misdial, hang up and dial again.
7
When a fax tone is heard, press
(START/COPY/SET).
8
Hang up the handset, if using it.
Note:
¡If the other party answers your call, ask them to start
receiving a fax, then press your (START/COPY/SET).
FACE DOWN
Dial keypad
(START/COPY/SET)
(STOP)
(SP-PHONE)
Document guides
To stop transmission
Press (STOP).
¡To eject the document, press (STOP) again.
128 mm
(5w)
128 mm
(5w)
600 mm
(23
5
⁄8w)
216 mm
(8
1
⁄2w)
Paper width
216 mm (8
1
⁄2w)
208 mm (8
3
⁄16w)
Scanned
area
4 mm
Minimum size Maximum size Effective scanning area Document weight
Single sheet:
45 to 90 g/m
2
(12 to 24 lb.)
Multiple sheets:
60 to 75 g/m
2
(16 to 20 lb.)
Documents the unit can feed
Note:
¡Remove clips, staples or other similar fastening objects.
¡Check that ink, paste or correction fluid has dried.
¡Do not send the following types of documents. Use copies for fax transmission.
—Chemically treated paper such as carbon or carbonless duplicating paper
—Electrostatically charged paper
—Heavily curled, creased or torn paper
—Paper with a coated surface
—Paper with a faint image
—Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)