Filter
Top Products
DISPLAY MESSAGE CAUSE AND REMEDY
60
¡The other fax machine does not have a polling feature. Check with the other
party.
¡The receiving unit is busy or ran out of recording paper. Try again.
¡The document is jammed. Remove the jammed document (p. 66).
¡Attempted to transmit a document longer than 600 mm (23
5
⁄8w). Press the STOP
button and remove the document (p. 66).
Divide the document into two or more sheets and try again.
¡There is too much paper on the paper stacker. Remove the printed paper. If the
display message still remains after removing the paper, a paper jam may have
occurred. Remove the jammed paper (see “When paper has jammed near the
recording paper exit” on page 65).
¡The starter film is empty. Replace the film or film cartridge with a new one
(p. 67, 68).
¡A transmission error occurred. Try again.
¡The unit is too hot. Let the unit cool down.
REMOVE DOCUMENT
TRANSMIT ERROR
STARTER FILM END
UNIT OVERHEATED
REMOVE PRINTOUT
REDIAL TIME OUT
Error messages on the display (cont.)
POLLING ERROR