Filter
Top Products
49
Features Summary
ON / ID=11
OFF
Basic features!
Programming table
Code
#01
To set the date and time before
using the unit
SET DATE & TIME
mm/dd/yy
hh:mm
(2 digits for
each entry)
See page 13 for details.
See pages 14 and 15 for details.
See page 16 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails (p. 28).
“ON”: The sending report will be
printed out at every transmission.
This setting is also available after
activating the FAX ONLY mode (p. 39).
“5 EXT.TAM” is used when using
the unit with an answering machine
(p. 40).
#02
To set your logo before using the unit
YOUR LOGO
(Up to 30
characters)
Display & Feature Settings How the unit operates
#03
To set your facsimile telephone
number before using the unit
YOUR FAX NO.
(Up to 20
digits)
#04
To print and check the sending
report for fax transmission result
SENDING REPORT
ERROR
ON
OFF
#13
If you cannot dial, change the
setting depending on your
telephone line service.
DIALING MODE
TONE
PULSE
#06
To change the number of rings
before the unit answers a call in the
FAX ONLY mode
FAX RING COUNT
1, 2, 3, 4,
5 EXT.TAM
(The default setting is in bold type.)
#12
If you use the unit with an
answering machine, activate this
feature and set the remote
activation ID for remote operation
to secure the remote operation for
the answering machine.
REMOTE TAM ACT.
To select “ON” and enter ID:
1. Press .
2. Rotate and select this
feature.
3. Press .
4. Rotate to select “ON”.
5. Press .
6. Enter your ID from 1 to 5 digits,
using 0–9, and #.
7. Press .
8. Press .
MENU
SET
SET
JOG DIAL
SET
JOG DIAL
MENU
“TONE”: For tone dial service.
“PULSE”: For rotary pulse dial
service.
KX-FP80 (048-053) 00.2.21 9:44 AM Page 49