Filter
Top Products
Features Summary
52
(The default setting is in bold type.)
Programming table (cont.)
Code Display & Feature Settings How the unit operates
#46
To receive a fax automatically
when you answer a call and hear
a fax calling tone (slow beep).
FRIENDLY RCV
ON
OFF
#44
To alert you with beeps when a
received document is stored into
memory due to a problem.
RECEIVE ALERT
ON
OFF
Advanced features (cont.)!
#41
If you use an extension telephone
and wish to receive a fax using it,
activate this feature, and press the
code (p. 44).
FAX ACTIVATION
ON /
CODE= 9
OFF
1. Follow steps 1 – 3 above.
2. Rotate to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
●
Do not enter “0000”.
●
This code is also used to receive
a voice message and a fax in the
same call (p. 41).
MENU
SET
SET
JOG DIAL
If you hear slow beeps, clear the
printing problem or supply paper to
print the stored document. The
beeps will stop.
“ON”: You do not have to press
for fax reception.
FAX START
How to set menu options
1. Press .
2. Rotate until the following is displayed.
Display:
Press and rotate until the desired
feature is displayed.
3. Press .
4. Rotate until the desired setting is displayed.
5. Press .
6. Press .
MENU
SET
JOG DIAL
SET
JOG DIAL
SET
ADVANCED MODE
JOG DIAL
MENU
Note:
●
Step 4 may be slightly
different depending on the
feature.
●
See page 48 for more details.
KX-FP80 (048-053) 00.2.21 9:44 AM Page 52