Filter
Top Products
If you hear slow beeps, erase the
recorded messages (p. 73). The
beeps will stop.
Voice guidance example:
“Start transmission.”
“Transmission is complete.”
“Transmission has failed.”
“Transmission has been interrupted.”
“Start reception.”
“Reception is complete.”
“Reception has failed.”
“Reception has been interrupted.”
“ON”: You do not have to press
for fax reception.
FAX START
If you wish to hear the voice
guidance (see right) at each fax
transmission/reception, set this
feature to “ON”.
●
To hear the voice guidance only
when fax transmission/reception
fails, select “ERROR”.
FAX1GUIDANCE
#47
Features Summary
86
(The default setting is in bold type.)
Programming table (cont.)
Code Display & Feature Settings How the unit operates
#46
To receive a fax automatically
when you answer a call and hear
a fax calling tone (slow beep).
FRIENDLY1RCV
ON
OFF
#44
To alert you with beeps when a
received document is stored into
memory due to a problem.
RECEIVE1ALERT
ON
OFF
Advanced features (cont.)!
If you hear slow beeps, clear the
printing problem or supply paper to
print the stored document. The
beeps will stop.
How to set menu options
1. Press .
2. Rotate until the following is displayed.
Display:
Press and rotate until the desired
feature is displayed.
3. Press .
4. Rotate until the desired setting is displayed.
5. Press .
6. Press .
MENU
SET
JOG DIAL
SET
JOG DIAL
SET
ADVANCED1MODE
JOG DIAL
MENU
Note:
●
Step 4 may be slightly
different depending on the
feature.
●
See page 82 for more details.
#43
To alert you with beeps when there
is less than 60 seconds of
remaining recording time.
REC.1TIME1ALERT
ON
OFF
ON
OFF
ERROR