Filter
Top Products
36
Sending Faxes
1
Insert the document FACE DOWN.
Display:
2
Press .
3
Press , then .
4
Press .
5
Press or to select “ON”.
●
If this feature is not required, select “OFF”.
6
Press .
7
Enter the fax number.
8
Press .
9
Enter the transmission start time.
Example: 11:30PM
Press , then press to select PM
(or AM).
Press .
Press .
●
When the programmed time has come, the unit
will automatically start transmission.
SEND AT 11:30PM
MENU
SETUP ITEM
[ ]
START/COPY/SET
TIME=11:30PM
01 31
TIME=12:00AM
START/COPY/SET
NO.=
START/COPY/SET
MODE=ON
▼ ▲
MODE=OFF
▼ ▲
START/COPY/SET
DELAYED SEND
2 5
1.SYSTEM SET UP
MENU
STANDARD
Using a built-in clock, this unit can send documents automatically at a specific time. This allows you to take
advantage of low-cost calling hours offered by your telephone company. The delayed transmission can be
reserved to take place up to 24 hours in advance.
FACE DOWN
START/COPY/SET
Dial keypad
MENU
(sending a fax at a specific time)
Note:
●
You can receive, transmit and copy
documents while delayed transmission is set.
●
When transmit polling (see page 37) is set to
“ON”, delayed transmission is not available.
●
You cannot use the EASY DIAL directory to
enter the fax number for this feature.
Delayed transmission
10
11