Filter
Top Products
58
Error Messages
Error messages on the LCD display
If the unit detects a problem, one or more of the following messages will appear on the display.
●
There is something wrong with the unit. Contact your service personnel.
●
The cover is open. Close it.
●
The document is not fed into the unit properly. Reinsert the document and try
again. If misfeeding occurs frequently, clean the document feeder rollers (p. 64).
If the problem remains, adjust the feeder pressure (p. 63).
●
Attempted to transmit a document longer than 600 mm (23
5
/
8
"). Press the
button to remove the document. Divide the document into two or more
sheets and try again.
●
Memory (telephone numbers, parameters, etc.) has been erased. Re-program.
●
The other party’s machine is busy or ran out of recording paper. Try again.
●
The unit ran out of recording paper. Install a recording paper roll (p. 17).
●
The other party’s machine does not have a polling feature. Check with the other
party.
●
The other party’s machine is busy or ran out of recording paper. Try again.
●
The document is jammed. Remove the jammed document (p. 63).
●
A transmission error occurred. Try again.
●
The unit is too hot. Let the unit cool down.
STOP
Cause & RemedyDisplay message
UNIT OVERHEATED
TRANSMIT ERROR
REMOVE DOCUMENT
REDIAL TIME OUT
POLLING ERROR
OUT OF PAPER
NO RESPONSE
CHECK MEMORY
CHECK DOCUMENT
CHECK COVER
CALL SERVICE