Filter
Top Products
59
Help
When a function does not work, check here
before requesting help
Operations
General
●
The power cord or telephone line cord is not connected. Check the
connections (p. 18).
●
The dialing mode setting is wrong. Change to TONE or PULSE
(p. 18).
●
Disconnect the unit from the telephone line and connect the line to
a known working telephone. If the working telephone operates
properly, contact your service personnel to have the unit repaired.
If the working telephone does not operate properly, contact your
telephone company.
●
The ringer volume is set to off. Adjust to a suitable level (p. 23).
●
If this button is pressed during dialing, a pause will be inserted. If
pressed immediately after a dial tone is obtained, the last number
dialed will be redialed.
●
A distinctive ringing pattern is set (p. 48).
●
All or part of their numbers are the same. Change the number
(p. 47, 51).
Cause & RemedyProblem
I cannot make and receive calls.
I cannot make calls.
The unit does not work.
The unit does not ring.
The button does
not function properly.
The receive mode does not function
as explained on pages 38 and 39.
During programming, I cannot enter
the code or the ID number.
REDIAL/PAUSE