Filter
Top Products
31
Preparation
Connecting to Computer
Disconnecting USB Cable
Cautions:
B
While POWER/BUSY Indicator (green) is blinking or WRITE Indicator (amber)
is lit:
ADo not disconnect USB cable.
ADo not disconnect AC adaptor.
(It may cause data corruption or computer operation failure. If the operation
becomes uncontrollable, restart or reset the computer.)
BWhen “B’s CLiP5” is in use, right-click the [B’s CLiP] indicator in
Task Tray. Select [Eject], then remove the disc and disconnect the USB
cable.
Before disconnecting USB cable, finish any writing, reading, or audio playback etc.
performed by the application software, and then remove the disc from the drive.
1 Double-click icon in Notification Area (Task Tray).
[Safe To Remove Hardware] window appears.
(The expression may differ depending on the Windows OS version. Follow
the equivalent prompts or instructions.)
2 Select “USB Mass Storage Device” and click [Stop] button.
[Stop hardware device] window appears.
3 Check “GENERIC CDRCB03 USB Device” is connected, then click
[OK].
Follow the on-screen instructions thereafter.
After disconnecting the interface cable, close the [Safe To Remove Hardware]
window.
Windows XP / Windows 2000