Filter
Top Products
45
For Your Reference
How to Make the CB30A Driver Installation Floppy Disk
USB Driver (included on the supplied CD-ROM)
It is necessary to install USB device driver first when your computer is used
Windows 98SE.
This USB Driver is designed for your drive to be installed on windows 98SE only.
Install this USB Driver from supplied CD-ROM or a floppy disk which you may
create yourself as follows.
1 Insert the floppy disk into floppy disk drive.
2 Insert the supplied CD-ROM into CD-ROM drive.
The program starts automatically and Setup Menu appears. If the program
does not start automatically, go to 4.
3 Click [END] to close Setup Menu.
4 From the Start menu, select [Programs] ➝ [Windows Explorer].
5 Click the Folder of Explorer [CB30_SOFT] ➝ [CB30Driver].
6 Select all the files in a CB30 Driver Folder, then drag and drop
onto the 3.5" floppy disk.
7 After copy is complete, remove the floppy disk and supplied
CD-ROM.
Note:
BIt is not necessary to install the USB Driver unless you use Windows 98SE.
When you make the installation floppy disk, a formatted floppy disk, floppy
disk drive and another CD-ROM drive are required.
Drag & Drop