Filter
Top Products
5. Copier
35
Note:
L You can save the previous page layout setting
(feature #467 on page 61).
5.2.5 To collate multiple copies
The unit can collate multiple copies in the same order as
the original document pages.
1 Set the original (page 19).
2 Press {COLLATE} repeatedly to display “ON”.
3 {SET}
4 Enter the number of copies (up to 99).
5 When using the scanner glass:
1. {START}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {SET}. Repeat this until all the
documents are scanned, then press {START}.
L The unit will start copying.
When using the auto document feeder:
{START} (KX-MB772 only).
6 After you finish copying, press {STOP} to reset this
feature.
Example: Making 2 copies of a 4-page original
document
Note:
L The unit will store the documents into memory while
collating the copies. If memory becomes full while
storing, the unit will only print out the stored pages.
During poster feature
1. Set the original and enter necessary settings for
poster size copy (steps 2 to 3 on “5.2.3 To make a
poster size copy (Poster feature) (Scanner glass
only)”, page 34).
2. Press {COLLATE} repeatedly to display “ON” and
continue copying (steps 3 to 6 on “5.2.5 To collate
multiple copies”, page 35).
During N in 1 feature
1. Set the original and enter necessary settings for N in
1 copy (steps 2 to 4 on “5.2.4 To copy several pages
onto 1 page (N in 1 feature)”, page 34).
2. Press {COLLATE} repeatedly to display “ON” and
continue copying (steps 3 to 6 on “5.2.5 To collate
multiple copies”, page 35).
Proof set feature (KX-MB772 only)
To make 1 set of collate copy first, press {COLLATE}
repeatedly to display “PROOF SET” (step 2 on “5.2.5 To
collate multiple copies”, page 35). The unit will make 1
set of collate copy and stop temporarily so you can check
whether the copy is made as you expected. If the copy is
correct, press {START} to continue copying.
If the copy is not correct, press {STOP} and start again
from the beginning.
Copy reservation
You can reserve your copy;
– while the unit is printing documents from your
computer.
– while the unit is printing received fax documents (KX-
MB772 only).
1. Set the original (page 19).
2. While “PC PRINTING” or “PRINTING” (KX-MB772
only) is displayed, press {COPY}.
3. Make necessary settings such as number of copies,
resolution, zoom features and page layout features.
i {START}
L “COPY RESERVED” will be displayed. The unit
will start copying after the current printing job.
“8 in 1”“PORTRAIT”
“LANDSCAPE”
Collated pages Uncollated pages
Original document Page layout
4
3
2
1
4
3
2
1
4
4
3
3
2
2
1
1