Filter
Top Products
6. Fax (KX-MB772 only)
40
2 Press {V} or {^} repeatedly to display the desired
broadcast memory (“<BROADCAST>” or “<MANUAL
BROAD>”). i {MENU} i {*}
3 Press {V} or {^} repeatedly to display the desired
item you want to add. i {SET}
L To add other items, repeat this step (up to 20
items).
4 {STOP}
Note:
L When adding new items to the MANUAL
BROADCAST memory, you can only select stored
items.
6.4.3 Erasing a stored item from the
broadcast memory
1
{DIRECTORY}
2 Press {V} or {^} repeatedly to display the desired
broadcast memory (“<BROADCAST>” or “<MANUAL
BROAD>”). i {MENU} i {#}
3 Press {V} or {^} repeatedly to display the desired
item you want to erase.
L To cancel erasing, press {STOP}.
4 {SET} i {SET} i {STOP}
6.4.4 Sending the same document to pre-
programmed parties
To send the same document using the scanner glass
1. Set the original (page 19).
2. If necessary, change to the desired resolution (page
36) and the desired contrast (page 36).
3. Press {BROADCAST} or {MANUAL BROAD}.
L To send a single page, skip to step 5.
L To send multiple pages, go to the next step.
4. Place the next page. i {SET}
L To send more pages, repeat this step.
5. {START}
L After transmission, the unit will automatically print
a report (broadcast sending report).
Note:
L To stop sending, see page 64.
L If you select “FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
send will decrease.
L If the document exceeds the memory capacity,
sending will be cancelled.
L If a party is busy or does not answer, it will be skipped
and redialled later 2 or more times.
To send the same document using the auto
document feeder
1. Set the original (page 19).
2. If necessary, change to the desired resolution (page
36) and the desired contrast (page 36).
3. Press {BROADCAST} or {MANUAL BROAD}.