Panasonic KX-MB262CX Printer User Manual


 
7. Caller ID (KX-MB772 only)
49
7.2 Viewing and calling back
using caller information
Important:
L Calling back will not be possible if the caller
information does not include a telephone
number.
L If the area code of the received telephone
number is the same as yours, the area code may
need to be deleted before calling back. This may
only apply to some areas. To edit the number, see
page 49.
1 {CALLER ID}
2 Press {V} to search from the recently received caller
information.
L If you press {^}, the display order will be
reversed.
L To send a fax, see page 36.
To change the way caller information is displayed
Press {CALLER ID} repeatedly after step 2.
Example: SAM LEE
11:20 20 Jul.,
b
3456789012
11:20 20 Jul.,
7.2.1 Symbols and operations for caller
information
What “,” means
,” on the display means the call has already been
viewed or answered.
To stop viewing
Press {STOP}.
7.3 Editing a caller’s telephone
number before calling
back/storing
The caller’s telephone number, which is sent to your
telephone from your local telephone exchange, includes
0 and an area code prefix. For local calls, 0 and the
area code prefix can be omitted (For New Zealand users
only).
1 {CALLER ID}
2 Press {V} or {^} repeatedly to display the desired
entry.
3 Press {CALLER ID} to display the telephone
number.
4 Press dial key (0 to 9) or {*} to enter the editing
mode and edit the telephone number.
L To send a fax, see page 36.
Note:
L The edited telephone number will not be saved in the
caller information. To save in the directory, see page
50.
To correct a mistake
1. Press {<} or {>} to move the cursor to the incorrect
number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the number you
want to delete and press {STOP}.