Panasonic KX-TGH263 Tablet Accessory User Manual


 
2 MbN:
Hold a MSELECTN
3 To answer the 2nd call:
Press MCELLN while the 2nd call is being
received.
4 To hang up the 2nd call and return to the
1st call (landline call), press MOFFN, then
press M
N.
Answering a 2nd call during a cellular
c
all
1 Press MMENUN during a cellular call.
2 MbN: Hold a MSELECTN
3 To answer the 2nd call:
Press M
N
or MCELLN while the 2nd call
is being received.
4 To hang up the 2nd call and return to the
1st call (cellular call), press MOFFN, then
press MCELLN
*1
.
*1 If you press MCELLN and the selection list
is displayed, select the desired cellular
line and press MSELECTN.
Intercom
I
ntercom calls can be made between
handsets.
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 35).
To answer the call with the handset, press
MOFFN, then press the corresponding line
key.
Making an intercom call
1 MM
ENUN (right soft key) a
a
MSELECTN
2 MbN: Select the desired unit. a MSELECTN
3 When you finish talking, press MOFFN.
Note:
R Y
ou can also use the MINTERCOMN soft
key, if displayed, to make intercom calls.
Answering an intercom call
1 P
ress M
N
to answer the page.
2 When you finish talking, press MOFFN.
Using the Smart function key
P
ress M
N
to answer the page.
Power back-up operation
f
or landline
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive landline calls using a
handset during a power failure. The base unit
will not perform any other functions. However,
some functions such as Caller ID and
phonebook are available only when using a
handset other than the handset supplying
power to the base unit. You can program
Power failure and the default setting is
Auto (page 37).
Important:
R If a handset is not placed on the base unit
when a power failure occurs, Base no
power Press OFF is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power back-up mode.
R Power back-up mode will not work if the
battery level of the power supplying
handset is
or .
R D
o not lift the power supplying handset
from the base unit during power back-up
mode.
24
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
TGH26x(en)_1217_ver051.pdf 24TGH26x(en)_1217_ver051.pdf 24 2013/12/17 18:31:482013/12/17 18:31:48