Panasonic KX-TGH263 Tablet Accessory User Manual


 
Storing unwanted callers
Storing a single phone number
I
mportant:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
When a cellular phone is paired:
1 MCN CID
2 MbN: Select the entry to be blocked. a
MMENUN
R To edit the number: MbN: Edit a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press * (Save). Go
to step 4.
3 MbN: Save caller ID a MSELECTN
4 MbN: Call block a MSELECTN
5 MbN: Yes a MSELECTN
6 Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MOFFN
When a cellular phone is not paired:
1 MCN CID
2 MbN: Select the entry to be blocked. a
MMENUN
R To edit the number: MbN: Edit a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press MSAVEN. Go to
step 4.
3 MbN: Save caller ID a MSELECTN
4 MbN: Call block a MSELECTN
5 MbN: Yes a MSELECTN
6 Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MOFFN
n By entering phone numbers:
1 MMENUN (right soft key) #217
2 MbN:
Block a single number a
MSELECTN
3 MMENUN a MbN: Add a MSELECTN
4 Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
5 MSAVEN a MOFFN
Storing a range of numbers
1 MMENUN (right soft key) #217
2 MbN: Block range of numbers a
MSELECTN
3 MMENUN a MbN: Add a MSELECTN
4 Enter the desired number (2-8 digits).
R To erase a digit, press MCLEARN.
5 MSAVEN a MOFFN
Blocking incoming calls that
h
ave no phone number
You can reject calls when no phone number is
provided, such as private callers or out of area
calls.
1 MMENUN (right soft key) #240
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R When the unit receives a cellular call
without a phone number, the call may not
be rejected.
Setting the first ring for the call
b
lock list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to Off. The default setting is On.
1 MMENUN (right soft key) #173
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
41
Programming
TGH26x(en)_1217_ver051.pdf 41TGH26x(en)_1217_ver051.pdf 41 2013/12/17 18:31:492013/12/17 18:31:49