Filter
Top Products
Note:
R I
f you cannot hang up the call using your
headset, press M
N
(STOP) on the base
unit.
Switching between the base unit and
y
our headset
You can switch between the base unit and
your headset while listening to messages
recorded on the base unit answering system.
R You can only switch from the base unit to
your headset.
n To switch to your headset:
Turn on the headset referring to your
headset operating instructions.
Call sharing between your headset
a
nd the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 37).
n While the handset is on a landline call:
To join the conversation with your headset,
turn on the headset referring to your
headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Adjusting your headset receiver
v
olume
Base unit
P
ress MjN or MkN repeatedly while using your
headset.
50
For assistance, please visit http://www.panasonic.com/help
Using Bluetooth Devices
TGH26x(en)_1217_ver051.pdf 50TGH26x(en)_1217_ver051.pdf 50 2013/12/17 18:31:502013/12/17 18:31:50