Filter
Top Products
INSTALLING
YOUR MACHINE
13
Installing Your Machine
Setting the Dialing Method (Tone or Pulse)
Your machine can operate with either of two dialing methods (Tone or Pulse), depending on the type of telephone
line you are connected to. If you need to change the dialing method to Tone or Pulse, follow the procedure below.
Make sure that the FAX lamp is ON. If not, press to select the "FAX MODE".
1
2
3
• If your machine does not have the 2nd G3 Fax
Communication Port Kit installed, proceed to Step 5.
If your machine does have the 2nd G3 Fax
Communication Port Kit installed, you can change
the dialing method for each of the telephone lines in
Step 4 below.
4
or
Continued on the next page...
SELECT A FUNCTION
DEFERRED COMM.
ADVANCED COMM.
EDIT FILE MODE
SET MODE
POLLING
SELECT MODE
PRINT OUT
EDIT PHONE BOOK
SET MODE 04 FAX PARAMETERS
FAX PARAMETERS
SELECT A FUNCTION
001 CONTRAST (HOME)
002 RESOLUTION (HOME)
003 ORIGINAL (HOME)
004 STAMP
005 MEMORY
CANCEL O K
01/20
006 DIALING METHOD
006 DIALING METHOD
Line-1 Line-2
CANCEL O K
Line-
1
Line-2
006 DIALING METHOD Line-1
TONE PULSE
CANCEL O K
Note1