Filter
Top Products
BASIC OPERATIONS
BASIC
OPERATIONS
45
(see Note 1)
(see Note 2)
(see Note 3)
(see Note 4)
(see Note 5)
NOTE
1. If you want to specify two or more destinations, press after completing the full telephone number so
you can select another destination.
2. If you need a special access number to get an outside line, dial it first then press to enter a pause
(represented by a "-") before dialing the full number.
Ex
: 9 PAUSE 5551234
3. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
(represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex
: 9 PAUSE TONE 5551234
4. This feature is called “Quick Memory Transmission”. If you wish to store All the original(s) into memory first
before transmitting, change the Fax Parameter No. 082 (QUICK MEMORY XMT) to “ Invalid”. (See page 35)
5. This field (AUTO, Line-1 or Line-2) appears only when the 2nd G3 Fax Communication Port Kit is installed.
SET
PAUSE
TONE
Sending Documents