Filter
Top Products
PROGRAMMING YOUR MACHINE
PROGRAMMING
YOUR MACHINE
33
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
001 CONTRAST 1 Lighter Setting the home position for the CONTRAST.
*4 Normal
7Darker
002 RESOLUTION *1 Standard Setting the home position for the RESOLUTION.
2Fine
3S-Fine
003 ORIGINAL *1 Text Setting the home position for the ORIGINAL.
2 Text/Photo
3 Photo
004 STAMP *1 Off Setting the home position of the STAMP.
To select the stamp function when the document is stored in
memory, see Fax Parameter No. 28.
2On
005 MEMORY 1 Off Setting the home position for the MEMORY.
*2 On
006 DIALING METHOD 1 Pulse Selecting the dialing method.
(Select Line-1 or Line-2 first, if you have the 2nd G3 Fax
Communication Port Kit installed)
*2 Tone
007 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside: Outside TX copy area.
No print: Header is not printed.
2 Outside
3 No print
008 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2From To
009 RCV'D TIME PRINT *1 Invalid Selecting whether the machine prints the received date & time,
remote ID, percentage of reduction and page number on the
bottom of each received document.
2Valid
010 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Medium
4 Loud
012 COMM. JOURNAL 1 Off Selecting the home position for the printing mode of the COMM.
Journal Off/Always/INC.
Off : Does not print
Always : Always prints
Inc. Only : Prints only when communication has failed.
2Always
*3 Inc. Only
Continued on the next page...
Customizing Your Machine