Filter
Top Products
PROBLEM SOLVING
176
Communication
No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line.
180
No auto answer 1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 013 (AUTO JOURNAL PRINT) is
set to "Valid" (default setting) and the machine is printing
the received document(s) from memory, which also
happens to be the 100th transaction, the machine will not
auto answer until the Transaction Journal completes
printing.
180
66
Cannot transmit or
receive
An information code will be shown on the display. Refer to the
information code table to find out the trouble.
177
No Unit Operation
No unit operation To reset the machine, turn-off the Power Switch for a few
seconds then turn it on again.
9
Mode Symptom Cause / Action Page
Troubleshooting