Filter
Top Products
PROBLEM SOLVING
PROBLEM
SOLVING
179
Verification Stamp
The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should be
replaced or refill the ink.
To remove the stamp
(see Note 1) (see Note 2)
1
Open the ADF Input Tray.
2
Open the ADF Exit Cover.
3
(1) Remove by pulling the Stamp Assembly
upward.
(2) Remove the Stamp. Replace the stamp
with a new one or refill the stamp with a few
drops of the specified ink into the back of
the stamp.
4
Reinstall the Stamp Assembly.
NOTE
1. Please contact your local Authorized Panasonic Dealer to purchase a new stamp. See page 72 of the Operating
Instructions (For Copier) for order number.
2. Stamp ink refills can be purchased from a stationary store. Use blue Shachihata” X” Stamp ink (No. 22113) or its
equivalent.
Troubleshooting