Filter
Top Products
16
Setting Machine
Registration of Domain Name
This sets the NT domain names and DNS sufx to use for user authentication.
Press
FUNCTION
SET
.
ENTER ACCESS CODE
Enter the access code (4-digit) set for the machine, and press
SET
.
ENTER ACCESS CODE
****
Press , and select "AUTH DOMAIN".
DATE & TIME
09-01-2005 12:00
Press
SET
.
AUTH DOMAIN
PRESS SET TO SELECT
A prompt appears for you to set the NT domain names.
You can set up to 10 domain names. Press or to select the entry
number ("01" to "10").
ENTER DOMAIN NAME
01
Enter the NT domain name, and then press
SET
. (Up to 15 characters)
ENTER DOMAIN NAME
01 PANA01
The next entry number appears (Return to step 5).
Enter the next domain name if required.
ENTER DOMAIN NAME
02
Press
STOP
to return to standby.
Note:
1. The User Authentication function becomes enabled after you perform
"Access Code Setting", "Authentication Setting" and "Domain Name
Registration", the control panel display changes from the standby message
to the login prompt.
2. Make sure that the Host Name has been set properly. For details, refer
to the Operating Instructions for Internet Fax/Email and Network Scan
Functions.
ENTER DNS DOMAIN
01 panasonic.com
Enter the DNS domain name, and then press
SET
. (Up to 60 characters)
Note:
If your Windows network is congured with Windows NT Server 4.0
and Exchange Server 5.5, enter the Exchange Server Name (FQDN)
or the IP Address on the Step 7.