Filter
Top Products
8
Using Machine (for User)
9
Using Machine (for User)
MMM-DD-YYYY 16:30
00%
Note:
One of the following messages appears if authentication fails.
This completes authentication.
After completing authentication, you can use the selected functions
(copying, faxing, scanning, or printing).
Message
Explanation
LOGIN FAILED The login failed.
Check your user name and password.
Check whether the Date and Time is set properly.
LOGON ATTEMPTS EXCEEDED The system has been locked because the permitted number of login
attempts has been exceeded. Please contact the system administrator.
CONNECTION FAILED Unable to connect to the authentication server. Please contact the system
administrator.
PROTOCOL ERROR Unable to connect to the authentication server. Please contact the system
administrator.
SERVER NOT FOUND Unable to nd the authentication server.
Check whether the DNS Domain Name is set properly (see page 16).
Check whether the Internet Parameters are set properly.
IP Address
Subnet Mask
Default Gateway IP Address
DNS Server Addresses
Authentication is cancelled if no operation is performed on the machine within a certain time after authentication
completes. In this case, you need to perform user authentication again before you can use the machine. The
system administrator can specify the ID Timeout Period.
See "ID Timeout Setting" on page 17 for details.
The system administrator can specify whether authentication is required independently for each machine
function (copying, faxing, scanning, and printing).
See "Authentication Setting" on page 13 for details.