Filter
Top Products
18
Setting Machine
Auto Reset Time Setting
This sets the ID timeout period when "AUTO RESET TIME" is selected for the ID Timeout Setting.
Note:
When the User Authentication function is enabled, you must login to the machine to change settings. See the following
sections for details about how to login.
See "Administrator Login" on page 24 for Logging in as the system administrator.
See "Login Procedure" on page 8 for Logging in as a user.
Login to the machine, and press
FUNCTION
SET
.
ENTER ACCESS CODE
Enter the access code (4-digit) set for the machine, and press
SET
.
ENTER ACCESS CODE
****
Press , and then press
SET
.
FAX PARAMETER(1-182)
NO.=
Select the timeout for canceling authentication.
SET
: 4 minutes
SET
: 3 minutes
SET
: 2 minutes
SET
: 1 minute
SET
: 30 seconds
SET
: (OFF) Do not cancel authentication regardless of the
elapsed time.
121 AUTO RESET TIME
3:1 min
Press
STOP
to return to standby.